a

The following are some of our best selling label printers. All are in stock and can be shipped the same day we receive your order.

LS250 ERROR MESSAGES

LS250 | Purchasing Information | Supplies | Tech. Support

FREE cleaning supplies These are the more common LS-250 error messages. For your convience they are listed in alphabetical order. Please see your LS250 User's Manual for a complete list of error messages. If you have any questions concerning your LS250, please feel free to contact us.

ERROR MESSAGE

If you have done this:

The problem (or solution) may be this:

CALL SERVICE

A failure requiring technical assistance has occurred.

Our customers can call 1-800-788-5572 for assistance. Or anyone can use our online form to request assistance.

CANNOT ENTER

You have just requested reversed colors on a label item.

Colors have already been reversed within this label segment.

You have just requested underlining for a complete line.

The line contains a bar code

You have just appended a bar code.

Two lines have already been created above the bar code. The bar code cannot be used with more than one line of text.

Or there is already a bar code in the zone.

You have just requested reversing colors.

The selected area overlaps a frame.

CAPS LOCK ON

You have just selected a character size.

The character size selected is the highest possible for the width of the adhesive tape used.

You have attempted to use lower case characters.

The character size selected is the highest possible for the width of adhesive strip used and lower case characters can not be accepted.

FRAMING IMPOSSIBLE

You have just activated the

XXX

function.

The selection already has a frame, inside an other frame or an overlap with reverse function.

INCORRECT SEQUENCE

You have just validated the second value in the sequence.

The second value is lower than the first.

INCORRECT STEP

You have just entered the incrementation step in a sequence.

The sequence incrementation step exceeds the last sequence value.

SPACE TOO LARGE

You have just selected a predefined length and specified a spacing value using the SPACE function.

Reduce the spacing percentage.

Or, increase the label's length.

SYSTEM
ON LINE

You have activated the INTERFACE function.

TAPE TOO SMALL

The cartridge of tape used is too narrow for the character size.

Install a cartridge with a wider adhesive tape.

You are in a vertical zone, and the characters are too large.

Reduce character sizes.

This message persists after installing the right cartridge.

Check that the cartridge identification holes used by the LS250 are uncovered.

The message persists.

Graphic Products' customers may call 1-800-788-5572 for assistance.

Call 1-800-788-5572 for fast, same-day shipping of
LS250 supplies.

Introduction
to 5S
The five steps of 5S lead to a better workplace. Learn about 5S from this
free guide.

Labeling Products is a Graphic Products' web site. Graphic Products is not a Brady authorized distributor and is neither affiliated with nor sponsored by Brady.
Although all Brady products sold by Graphic Products are authentic Brady products, Brady does not endorse or sponsor Graphic Products' sale of Brady products.
All Brady trademarks used herein are owned by Brady Corporation and describe authentic Brady Products. Graphic Products carries a large inventory of Brady products
to service existing customers as well as new customers. We continue to provide excellent technical support and service to our customers.