|
RTK
Labeling:
Learn about NFPA Labels, Safety Labels and Right To Know Labels
RTK Labeling Home Page | Free
NFPA Guide
The National
Fire Protection Association (NFPA) diamond is an easily recognizable
system for identifying the health and physical hazards associated
with specific chemicals. It was originally developed to aid fire
fighters responding to emergencies in industrial settings where
dangerous chemicals were present. Today, it is used in RTK labels
and HazCom programs in a variety of work environments.
The NFPA Diamond
uses color codes to identify Health risks (in blue), Flammability
(in red), Instability (in yellow), and Special Hazards (in white).
It rates the severity of the hazard on a scale of 0 to 4 with 4
being the most severe.
|
Fire
Hazard (Red)
Flash Points
4 -
Below 73 F
3 - Below 100 F
2 - Below 200 F
1 - Above 200 F
0 - Will not burn |
|
|
Health
Hazard
(Blue)
4 -
Deadly
3 - Extreme Danger
2 - Hazardous
1 - Slightly Hazardous
0 - Normal Material |
 |
Instability
(Yellow)
4 -
May Detonate
3 - Shock and Heat May Detonate
2 - Violent Chemical Change
1 - Unstable if Heated
0 - Stable |
| |
Specific
Hazard
(White)
Oxidizer
---- OXY
Acid ---- ACID
Alkali ---- ALK
Corrosive ---- COR
Use No Water ---- 
Radiation Hazard ---- 
Polymerizes ---- P
No special hazard ----  |
Related
links
OSHA
HazCom Standard {HCS 1910.1200}
NFPA (National Fire Protection
Association)
Free Guide to the NFPA Diamond
This guide
is intended for general information purposes only. This guide
is not a substitute for review of applicable government regulations
and standards. |
|
